Any
Any Machine
15 minutesEasyLoRaWAN
What You Need
CT101 LoRaWAN current clampIncluded in kit
Zip ties or adhesive mountIncluded in kit
Customer provides:
- Access to machine power feed
Physical Connection
- 1
Identify the power feed
Locate the main power cable feeding the machine. You'll clamp around ONE conductor (not the whole cable).
If the machine has a disconnect or breaker panel, clamp on the load side.
- 2
Attach CT clamp
Open the CT101 split-core clamp and snap it around one phase conductor. No wire cutting needed.
- 3
Mount the CT101 transmitter
Mount the CT101 transmitter nearby (within cable reach of the clamp). Use the included zip ties or adhesive mount.
- 4
Power on
The CT101 is battery-powered (5+ year life). Remove the battery tab to activate.
Verification
- 1
Check LoRaWAN join
Within 5 minutes, the CT101 should appear in the LoRaWAN network server (The Things Stack).
- 2
Verify readings
Flowstate dashboard shows current (amps) and on/off status within 15 minutes.
Available Metrics (5)
Current draw (amps)
On/off status
Runtime hours
Idle detection
Power anomaly alerts
Ready to Connect?
Calculate what downtime is costing you, then get started.