Haas
UMC-750
Also applies to: UMC-750SS, UMC-500, UMC-1000
30 minutesEasyMTConnectFull OEE
What You Need
Cat6 Ethernet cableIncluded in kit
Flowstate CL260 edge nodeIncluded in kit
Customer provides:
- Network access
Physical Connection
- 1
Locate Ethernet port
Back of control cabinet, RJ45 'NET' port.
- 2
Connect cable
Cat6 to Flowstate edge node.
- 3
Set static IP
Settings > Network > Static IP.
Machine Configuration
- 1
Enable MDC
Setting 143 = ON. Same process as all Haas NGC controllers.
Verification
- 1
Verify connection
Ping + MTConnect XML at port 5000 + Flowstate dashboard.
Available Metrics (7)
Execution mode
Spindle speed/load
All 5 axis positions (X/Y/Z/A/B)
Feed rate
Program name
Part count
Alarms
Don't have MTConnect access?
The universal CT clamp works on any machine — 15 minutes, zero configuration.
CT Clamp Fallback GuideReady to Connect?
Calculate what downtime is costing you, then get started.