Okuma
GENOS M560-V
Also applies to: M460-V, M660-V
45 minutesModerateMTConnectFull OEE
What You Need
Cat6 Ethernet cableIncluded in kit
Flowstate CL260 edge nodeIncluded in kit
Customer provides:
- THINC-API license
- Network access
Physical Connection
- 1
Enable THINC-API
Okuma OSP control: Contact Okuma to activate THINC-API license.
THINC-API is a paid option. Newer OSP-P controls may include it.
- 2
Connect Ethernet
OSP control has Ethernet port. Connect to Flowstate edge node.
- 3
Set IP
OSP control network settings: static IP in 10.0.100.x.
Machine Configuration
- 1
Start MTConnect adapter
THINC-API includes an MTConnect adapter service. Start via OSP control panel.
Verification
- 1
Check MTConnect
Browse to http://<ip>:5000/current to verify data stream.
Available Metrics (7)
Execution mode
Spindle speed/load
Axis positions
Feed rate
Program name
Part count
Alarms
Don't have MTConnect access?
The universal CT clamp works on any machine — 15 minutes, zero configuration.
CT Clamp Fallback GuideReady to Connect?
Calculate what downtime is costing you, then get started.